BBTLQ - CARBON AND ALLOY STEELS
- MSDS: BBTLQ
- Manufacturer: NUCOR STEEL
- Product Name: CARBON AND ALLOY STEELS
- National Stock Number: 6850-00F005892
Product Identification
Product ID:CARBON AND ALLOY STEELS
MSDS Date:01/01/1987
FSC:6850
NIIN:00F005892
MSDS Number: BBTLQ
Responsible Party
Emergency Phone: (803) 393-5841
Cage: 6M959
Contractor
Cage: 6M959
Ingredients
GRAPHITE, SYNTHETIC
CAS: 7440-44-0
RTECS: FF5250100
Fraction By Weight: 1.5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 10%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
IRON ION (FE +2)
CAS: 15438-31-0
RTECS: NO6925000
Fraction By Weight: 99.5%
OSHA PEL 1 MG/M3 (FE)
ACGIH TLV: 1 MG/M3 (FE); 8990
COLUMBIUM (<.15-.35%)
Fraction By Weight: .35%
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 1.90%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:FUMES & DUST INHALATION: IRRITATION OF EYES,
NOSE, THROAT, RESP TRACT/CANCER OF NOSE & LUNGS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. CONSULT A PHYSICIAN. EYE:
FLUSH WITH WATER; OBTAIN MEDICAL ATTENTION. SKIN: REMOVE BY WASHING
WITH SOAP & WATER. SEEK MEDICAL ATTENTION. INGESTION: IF
SIGNIFICANT AMOU NTS OF METAL ARE INGESTED, CONSULT A PHYSICIAN
Fire Fighting
Extinguishing Media:USE DRY POWDER OR SAND.
Fire Fighting Procedures:FINE METAL PARTICLES CAN BURN. _
Unusual Fire/Explosion Hazard:HIGH AIR CONC OF METALLIC FINES MAY BE
EXPLOSION HAZARD. WATER MAY CAUSE MOLTEN METAL TO EXPLODE.
Accidental Release
Spill Release Procedures:FINE TURNING & SMALL CHIPS SHOULD BE SWEPT OR
VACUUMED. SCRAP METAL CAN BE RECLAIMEDOR REUSE.
Handling
Handling and Storage Precautions:MINIMIZE AND CONTROL OPERATIONS
PRODUCING DUST AND FUME.
Exposure Controls
Respiratory Protection:APPROPRIATE DUST/MIST/FUME RESPIRATOR SHOULD BE
USED.
Ventilation:PROVIDE ADEQUATE EXHAUST VENTILATION TO KEEP
Eye Protection:SAFETY GLASSES/FACE SHIEL
Other Protective Equipment:AS REQUIRED DEPENDING ON OPERATIONS AND
SAFETY CODES.
Supplemental Safety and Health
11/25/85. (AL) <0.1-0.5%/(BL) <0.2-0.5%/ (B) <.01-1.0%/(PB)
<.01-.15%/(MN) <.04-9.7%/(MO) <.15-1.10%/(NI) <.01-10%/(P)
<.0-.12%/(SI) <.15-2.00%/(S) <.050-.35%/(V) <.01-.15%.
Chemical Properties
Spec Gravity:.7
Appearance and Odor:GRAY-BLACK OR SILVER-GRAY ODORLESS METAL.
Stability
Stability Indicator/Materials to Avoid:YES
REACTS W/STRONG ACIDS TO FORM HYDROGEN GAS _
Stability Condition to Avoid:STEEL TEMPS >MELTING POINT LIBERATES FUMES
Conditions to Avoid Polymerization:FUMES CONTAIN OXIDES OF IRON &
ALLOYING ELEMENTS.
Disposal
Waste Disposal Methods:USED OR UNUSED PRODUCT SHOULD BE DISPOSE OF IN
ACCORDANCE WITH FEDERAL, STATE OR LOCAL LAWS AND REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.